Why do I need an emergency starter?

1. The battery is exhausted after a long standby time

2. Be prepared for a long drive

3, the vehicle can not start due to insufficient power or cold winter

We help you! Car emergency start!

Precautions before use of emergency power supply:

1, the product just received. Please turn on the flashlight to discharge, and then charge the product for more than 4 hours, and then start the car, because the product contains virtual electricity. This operation can extend the service life of the product!

2, it is recommended to start the car with three levels or more than 60% electricity

3, check whether the battery stack head is clean

4. Start the car with an ordinary clip: check who the blue mouth of the clip is fully inserted to check who the clip has the large contact area with the positive and negative electrodes of the battery, and whether the clip is stable and does not shake. First, clip the positive and negative terminals of the clip to the positive and negative terminals of the battery respectively. Wait 2 to 3 minutes before starting the car. This reduces the load on the power supply.

Fast Inflation and easy operation This car pull air compressor inflates your standard car tires in seconds. Plug it into the car's 12V power outlet and connect the valve stem to the tire valve puzzle. Just click on the car air compressor and it will do all the work for you.

The LED lights with tire inflation emergency starting power supply include three modes (normal, Stroboscopic, SOS), which can be used in different emergency situations.

Mobile power battery jump air compressor is also a mobile power supply. Through the USB port, you can charge your USB device.

When you don't know if your pull pressure is in normal condition, you can measure it with the V5 air compressor, which will show your pull pressure on the display.

Easy-to-carry straps are designed to be adaptable and ergonomic, making them easier to carry.

Don't worry about connecting the wrong port There is a secure tester that will alert you when you connect the wrong port, which won't cause any problems for the device and the car.

Tips before use:

1. Do not continuously ignite/hold down the key while turning the car. Wait 30 seconds between starts and then start the next one.

2, positive and negative poles can not be connected. No short circuit between the two clamps.

3. Remove the clamp within 30 seconds after the car starts success.

Fail to observe the above three points may cause the clip's [fuse box] to burn out. Be sure to pay attention to the operation method.

Product parameters:

Specifications: Emergency start power supply air pump integrated machine + ordinary pack clip

Emergency start

Battery capacity: 8000mAh

Mobile Power Supply (Fast charging)

LED lights (SOS/ Lighting/Stroboscopic)

Working light indicator

Automobile emergency start output: 12V

150PSI air compressor

Packing weight: 1200g